GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2000
🢒
Chevy Suburban - 4WD
🢒
Body and Accessories
🢒
Instrument Panel, Gauges, and Console
🢒 Control Assembly Replacement
Control Assembly Replacement Heat only
Removal Procedure
Remove the instrument panel (IP) bezel. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Instrument Panel, Gauges and Console.
Remove the radio. Refer to
Radio Replacement
in Entertainment.
Remove the heater control assembly by firmly depressing and holding the retaining tabs. Slide the assembly forward.
Disconnect the temperature and the mode cables from the back of the control assembly.
Disconnect the electrical connection from the control assembly.
Remove the control assembly.
Installation Procedure
Connect the electrical connection to the control assembly.
Connect the temperature and the mode cables to the back of the control assembly.
Install the control assembly to the IP carrier until you hear an audible snap.
Install the radio. Refer to
Radio Replacement
in Entertainment.
Install the IP bezel. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Instrument Panel, Gauges and Console.
Control Assembly Replacement Heat and A/C
Removal Procedure
Remove the instrument cluster trim plate bezel. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Instrument Panel, Gauges, and Console.
Remove the IP storage tray.
Remove the inflatable restraint module switch form the instrument panel. Refer to
Inflatable Restraint Instrument Panel Module Disable Switch Replacement
in Restraints.
Remove the control assembly.
4.1.
Release the retaining tabs.
4.2.
Pull the control head out of the instrument panel carrier.
Disconnect the electrical connectors from the control assembly.
Installation Procedure
Connect the electrical connectors to the control assembly.
Install the control assembly.
Install the inflatable restraint module switch to the instrument panel. Refer to
Inflatable Restraint Instrument Panel Module Disable Switch Replacement
in Restraints.
Install the IP storage tray.
Install the instrument cluster trim plate bezel. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Instrument Panel, Gauges, and Console.