GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Chevy C Pickup - 2WD 🢒 Body and Accessories 🢒 Seats 🢒 Rear Seat Heater Switch Replacement

Removal Procedure

    Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

  1. Remove the battery negative cable.

    2. Object Number: 288155 Size: SH
  2. Remove the console storage bin. Refer to Front Floor Console Compartment Replacement in Instrument Panel, Gauges and Console.
  3. Remove the switch connector.
  4. Remove the switch (3) through the center of the console.

Installation Procedure

    Object Number: 288155 Size: SH
  1. Install the switch (3) through the center of the console.
  2. Install the switch connector.
  3. Install the console storage bin. Refer to Front Floor Console Compartment Replacement in Instrument Panel, Gauges and Console.
  4. Install the battery negative cable.