Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: This diagnostic should only be used if the power seat is inoperative in all modes. | ||||
1 | Has the Power Seats System Check been performed? | -- | Go to Step 2 | Go to Power Seats System Check |
2 |
Did the test lamp light? | -- | Go to Step 3 | Go to Step 4 |
3 | Connect a J 35616-200 test lamp between CKT 150 (BLK) cavity C and CKT 540 (ORN) cavity F at the power seat adjuster. Did the test lamp light? | -- | Go to Step 5 | Go to Step 6 |
4 | Repair the open in CKT 540 (ORN) between the power seat adjuster switch and the IP fuse block. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Power Seats System Check | -- |
5 | Replace the power seat adjuster switch. Refer to Power Seat Switch Replacement . Is the repair complete? | -- | Go to Power Seats System Check | -- |
6 | Repair the open in CKT 150 (BLK) between the power seat adjuster switch and ground G202. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Power Seats System Check | -- |
