Tools Required

J 34940 Rivet Gun

1. Remove the trim panel. Refer to Front Side Door Trim Panel Replacement .
2. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .



3. Remove the inside door handle assembly by completing the following steps:

•	Drill out the rivet head using a 5 mm (0.2 in) drill bit.

•	Slide forward the door handle.

4. Disconnect the control rods from the handle and the lock lever.

1. Connect the control rods to the handle and the lock lever.



2. Install the inside door handle by completing the following steps:

•	Insert the handle assembly into the slot.

•	Slide the assembly to the rear.

•	Using the J 34940 , install the handle rivet.

3. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
4. Install the trim panel. Refer to Front Side Door Trim Panel Replacement .