Symbol | Description |
|---|---|
ANTI-LOCK | ABS: Refer to ABS Description and Operation in Antilock Brake System |
(Canada)
BRAKE (U.S.) | Brake: Refer to Brake Warning System Description and Operation in Hydraulic Brakes |
| Charge: Refer to Charging System Description and Operation in Engine Electrical |
CHECK GAGES | Check Gages: Refer to Indicator/Warning Message Description and Operation |
| DRL: Refer to Exterior Lighting Systems Description and Operation in Lighting Systems |
| Fasten Safety Belt: Refer to Seat Belt System Description and Operation in Seat Belts |
| High Beam: Refer to Exterior Lighting Systems Description and Operation in Lighting Systems |
LOW COOLANT | Low Coolant: Refer to Cooling System Description and Operation in Engine Cooling |
REDUCED ENGINE POWER | Reduced Engine Power: Refer to Powertrain Control Module Description in Engine Controls-8.1L |
SECURITY | Security: Refer to Theft Systems Description and Operation in Theft Deterrent |
CHECK (Canada) SERVICE ENGINE SOON (U.S.) | Malfunction Indicator Lamp (MIL): Refer to Powertrain Control Module Description in Engine Controls - 6.5L or to Powertrain Control Module Description in Engine Controls - 8.1L |
SERVICE THROTTLE SOON | Service Throttle Soon: Refer to Powertrain Control Module Description in Engine Controls - 6.5L |
| Turn Signals: Refer to Exterior Lighting Systems Description and Operation in Lighting Systems |
WAIT TO START | Wait To Start: Refer to Glow Plug System Description in Engine Controls - 6.5L |
WATER IN FUEL | Water In Fuel: Refer to Indicator/Warning Message Description and Operation |
Check Gages
The CHECK GAGES indicator is displayed in the IPC, when one of the following conditions exist:
| • | The engine coolant temperature is at or above 118°C (244°F). |
| The check gages lamp driver monitors the engine coolant temperature gage. The check gages lamp driver is located internally in the IPC. |
| • | The engine oil pressure is at or below 34 kPa (5 psi). |
| The check gages lamp driver monitors the engine oil pressure gage. The check gages lamp driver is located internally in the IPC. |
Water In Fuel
The WATER IN FUEL indicator illuminates in the IPC when the water in fuel sensor detects water in the fuel tank. The water in fuel sensor grounds the water in fuel indicator control circuit in order to illuminate the WATER IN FUEL indicator.
