Removal Procedure
- Remove the left knee bolster. Refer to
Knee Bolster Replacement
in Instrument Panel, Gauges and Console.
- Remove the retaining screws (6)
from the outlet duct.
- Disconnect the duct from the air distribution duct (2).
- Remove the outlet duct (4) from the vehicle.
Installation Procedure
- Install the outlet duct (4)
to the vehicle.
- Connect the duct to the air distribution duct (2).
- Install the retaining screws (6) to the outlet duct.
- Install the left knee bolster. Refer to
Knee Bolster Replacement
in Instrument Panel, Gauges and Console.