The C3500HD pedal looks the same as the other models, but uses a different torque applying pedal assembly.

1. Release the park brake.
2. Disconnect the electrical connector from the park brake switch.



3. Disconnect the release cable (4).



4. Remove the release handle (2).



5. Remove the 3 bolts from park brake pedal assembly.
6. Remove the pedal assembly (1).

1. Install the pedal assembly (1).




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the 3 bolts (2).

Tighten
Tighten the bolts to 24 N·m (18 lb ft).




3. Install the release handle (2).
4. Connect the release cable.
5. Connect the connector to the park brake switch.
6. Adjust the park brake. Refer to Park Brake Adjustment .