Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the negative battery cable.
2. Remove the engine front cover. Refer to Engine Front Cover Removal in Engine Mechanical.



3. Remove the CKP sensor reluctor ring (3) from the crankshaft (2).

Important: Inspect the crankshaft key for burrs or nicks. Replace the key if necessary.

1. Install the CKP sensor reluctor ring (3) to the crankshaft (2).
2. Install the engine front cover. Refer to Engine Front Cover Removal in Engine Mechanical.
3. Connect the negative battery cable.