Removal Procedure
- Peel the weatherstrip
from the gutter flange. Move the weatherstrip in the following direction:
| 1.1. | Toward the lower corners |
| 1.2. | Around the complete opening |
- Clean all of the adhesive from the pinch-weld flange.
Installation Procedure
- Apply a bead of weatherstrip
adhesive to the following areas:
| 1.1. | The edge of the pinch-weld flange |
| 1.2. | Around the entire perimeter of the rear compartment opening |
- Install the center of the weatherstrip onto the gutter flange.
Begin at the forward center of the opening between the flanges.
- Push down by hand the weatherstrip over the entire area. This
process ensures the proper seating of the weatherstrip.
