Removal Procedure
- Place the sunroof into the full vent position.
The full vent position can be achieved by opening the sunroof all the
way.
- Place the sunroof sunshade (1)
into the open position.
- Push the guide (2) on the left front sunroof sunshade toward
the middle of the vehicle.
This will overcome the spring pressure (3) and disengage the
guide from the track on the left front sunroof sunshade.
- Slide the sunroof sunshade (1) into the closed position.
- Push the guide on the left rear sunroof sunshade toward the middle
of the vehicle.
This will overcome the spring pressure and disengage the guide on the
left rear sunroof sunshade.
- Remove the sunroof sunshade (1) from the vehicle using
the following procedure:
6.1. | Pull the sunroof sunshade (1) towards the left side of
the vehicle in order to disengage the guides on the right side sunroof sunshade. |
6.2. | Pull the sunroof sunshade out between the glass panel and the
roof. |
Installation Procedure
- With the sunroof in the
full vent position, Install the sunroof sunshade (1) into the vehicle
between the roof and the glass panel.
- Position the guides on the right side sunroof sunshade to the
guide rail.
- Engage the guide on the left rear sunroof sunshade to the guide
rail.
Use a flat bladed tool.
- Slide the sunroof sunshade (1) to the open position.
- Engage the guide (2) on the left front sunroof sunshade
to the guide rail.
- Cycle the sunshade (1) by hand to check for proper operation.