GM Service Manual Online
For 1990-2009 cars only

Front Bumper Fascia Replacement Chevrolet

Removal Procedure

  1. Remove the front fender liners. Refer to Front Fender Liner Replacement in Body Front End.

  2. Object Number: 284848  Size: SH
  3. Remove the bolts (1) that retain the fender to the fascia (2).

  4. Object Number: 284846  Size: SH
  5. Remove the retainers from the top of the fascia (1).
  6. Remove the fascia (1) from the impact bar (3).
  7. Disconnect the electrical connectors from the park lamps and the turn lamps.

Installation Procedure

  1. Connect the electrical connectors to the turn lamps and the park lamps.

  2. Object Number: 284846  Size: SH
  3. Install the fascia (1) to the impact bar (3).
  4. Install the retainers to the top of the fascia (1).

  5. Object Number: 284848  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  6. Install the bolts (1) to the fender and the fascia (2).
  7. Tighten
    Tighten the bolts to 9 N·m (80 lb in).

  8. Install the front fender liners. Refer to Front Fender Liner Replacement in Body Front End.

Front Bumper Fascia Replacement Pontiac

Removal Procedure

  1. Remove the front fender liners. Refer to Front Fender Liner Replacement in Body Front End.

  2. Object Number: 284840  Size: SH
  3. Remove the bolts (2) that retain the fender to the fascia (3).

  4. Object Number: 284844  Size: SH
  5. Remove the retainers (2) from the top of the fascia (1).
  6. Remove the fascia (1) from the impact bar (3).
  7. Disconnect the electrical connectors from the park lamps and the turn lamps.

Installation Procedure

  1. Connect the electrical connectors to the park lamps and the turn lamps.

  2. Object Number: 284844  Size: SH
  3. Install the fascia (1) to the impact bar (3).
  4. Install the retainers (2) to the top of the fascia (1).

  5. Object Number: 284840  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  6. Install the bolts (2) to the fender and the fascia (3).
  7. Tighten
    Tighten the bolts to 9 N·m (80 lb in).

  8. Install the front fender liners. Refer to Front Fender Liner Replacement in Body Front End.