For 1990-2009 cars only
Important: The following steps must be completed before using the symptom tables.
- Perform Diagnostic System Check - Remote Keyless Entry before using the Symptom Tables in order to verify that all of the following are true:
- Review the system operation in order to familiarize yourself with the system functions. Refer to Keyless Entry System Operation .
| • | There are no DTCs set. |
| • | The control module can communicate via the serial data link. |
For proper operation, actuate the transmitter at least 12 inches away from the body control module.
Visual/Physical Inspection
| • | Inspect for aftermarket devices which could affect the operation of the Remote Keyless Entry System. Refer to Checking Aftermarket Accessories in Wiring Systems. |
| • | Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom. |
| • | Inspect that the keyless entry transmitter is the correct model for the vehicle remote system. A wrong model transmitter will not activate the vehicle remote system. |
Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections in Wiring Systems.
Symptom List
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:
