Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: The chime sounds with the driver's door open. | ||||
1 | Did you perform the Audible Warnings Diagnostic System Check? | -- | Go to Step 2 | Go to A Diagnostic System Check - Audible Warnings |
2 | Are any indicators illuminated? | -- | Go to Symptoms - Audible Warnings | Go to Step 3 |
3 |
Does the chime sound? | -- | Go to Step 4 | Go to Testing for Intermittent and Poor Connections in Wiring Systems |
4 | Turn ON the ignition, with the engine OFF. Are the instrument panel lamps illuminated on the instrument panel cluster? | -- | Go to Instrument Panel Lamps Always On in Lighting Systems | Go to Step 5 |
5 |
Does the Key In Ignition parameter display Off? | -- | Go to Step 7 | Go to Step 6 |
6 | Test the signal circuit of the key in ignition switch for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 9 | Go to Step 8 |
7 | Replace the ignition switch. Refer to Ignition Switch Replacement - On Vehicle in Steering Wheel and Column - Standard or Ignition Switch Replacement - On Vehicle in Steering Wheel and Column - Tilt. Did you complete the replacement? | -- | Go to Step 9 | -- |
8 |
Important: Perform the set up procedure for the BCM. Refer to BCM Programming/RPO Configuration in Body Control System. Replace the BCM. Refer to Body Control Module Replacement in Body Control System. Did you complete the replacement? | -- | Go to Step 9 | -- |
9 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
