Removal Procedure
- Disconnect the electrical
connector from the washer pump.
- Disconnect the hose from the washer pump.
- Remove the washer pump from the washer solvent container.
Installation Procedure
- Install the washer pump
in the washer solvent container.
1.1. | Push the washer pump down into the washer solvent container completely. |
1.2. | Push the top of the washer pump into the side of the washer solvent
container. |
- Connect the hose to the washer pump.
- Connect the electrical connector to the washer pump.
- Fill the washer solvent container.
- Operate the washer system and inspect for proper operation.