GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Cavalier 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Side Marker Lamp Replacement

Removal Procedure

    Object Number: 590956 Size: SH
  1. Remove the screw (3) from the side marker lamp (2).
  2. Remove the side marker lamp (2) from the front fascia.
  3. Remove the socket from the lamp assembly.

    4. Twist and pull outward.

Installation Procedure

    Object Number: 590956 Size: SH
  1. Install the socket to the lamp assembly.

    2. Ensure the unit is retained.

  2. Install the side marker lamp (2) to the front fascia.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screw (3) to the side marker lamp assembly (2).

    4. Tighten
    Tighten the screw to 2 N·m (18 lb in).