Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Inspect the linkage for improper adjustment or wear. Is there any of these conditions? | -- | ||
2 | Repair or replace the linkage as needed. Does the transaxle still slip out of gear? | -- | System OK | |
3 | Inspect that the transaxle is tight on the engine housing. Is the transaxle loose? | -- | ||
4 | Tighten the transaxle to the mounts. Refer to Fastener Tightening Specifications . Does the transaxle still slip out of gear? | -- | System OK | |
5 | Inspect the shift linkage. Does the shift linkage bind? | -- | ||
6 | Repair or replace the shift linkage as needed. Does the transaxle still slip? | -- | System OK | |
7 | Inspect the cables. Are they bent or worn? | -- | ||
8 | Repair or replace the cables as needed. Does the transaxle still slip out of gear? | -- | System OK | |
9 | Inspect the input gear bearing retainer . Is the retainer broken or loose? | -- | ||
10 | Repair or replace the retainer. Does the transaxle still slip out of gear? | -- | System OK | |
11 | Inspect the shift fork. Is the shift fork worn or bent? | -- | ||
12 | Repair or replace the shift fork as needed. Does the transaxle still slip out of gear? | -- | System OK | |
13 | Inspect the clutch housing and engine . Is the clutch housing or the engine dirty? | -- | ||
14 | Clean the clutch housing and the engine. Does the transaxle still slip out of gear? | -- | System OK | |
15 | Inspect the shift lever seal. Is the seal stiff? | -- | ||
16 | Repair or replace the seal. Does the transaxle still slip? | -- | System OK | |
17 | Disassemble the transaxle and repair as necessary. Refer to the M86/M94 Section of the Transmission Unit Repair Manual. Does the transaxle still slip out of gear? | -- | -- | System OK |
