GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Cavalier 🢒 Transmission/Transaxle 🢒 Automatic Transaxle - 3T40 🢒 Governor Replacement

Removal Procedure
  1. Raise the vehicle. Support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the vehicle speed sensor (VSS) assembly. Refer to Vehicle Speed Sensor Replacement .

    3. Object Number: 104311 Size: SH
  3. Remove the governor.
  4. Remove the governor compression ring.

    5. Object Number: 104312 Size: SH
  5. Remove the governor shaft seal.
  6. Remove the governor shaft bushing and the screen.

Installation Procedure

    Object Number: 104312 Size: SH
  1. Install the governor shaft bushing and the screen.
  2. Install the governor shaft seal.

    3. Object Number: 104312 Size: SH
  3. Install the governor compression ring.
  4. Install the governor.
  5. Install the vehicle speed sensor (VSS) assembly. Refer to Vehicle Speed Sensor Replacement .
  6. Lower the vehicle.
  7. Adjust the transmission oil level. Refer to Transmission Fluid Check .