For 1990-2009 cars only
- Loosen both strut to knuckle nuts just enough to allow for movement.
- If the strut has not been modified previously, perform the following steps before continuing with the wheel alignment:
- Adjust the camber to specification by moving the top of the wheel in or out. Refer to Wheel Alignment Specifications .
| 2.1. | Disconnect the strut from the knuckle. Refer to Strut Assembly Replacement in Front Suspension. |
| 2.2. | File the lower hole until the outer flange slot matches the inner flange slot. |
| 2.3. | Connect the strut to the knuckle. Refer to Strut Assembly Replacement in Front Suspension. |
