GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Camaro 🢒 Body and Accessories 🢒 Instrument Panel, Gages, and Console 🢒 Floor Console Bracket Replacement

Removal Procedure

    Object Number: 507517 Size: SH
  1. Remove the front floor console. Refer to Front Floor Console Replacement .
  2. Remove the console bracket bolts.
  3. Remove the console bracket.

Installation Procedure

    Object Number: 507517 Size: SH
  1. Align the console bracket to the instrument panel (IP) tie bar.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the console bracket bolts.

    3. Tighten
    Tighten the bolts to 2 N·m (18 lb in).

  3. Install the front floor console. Refer to Front Floor Console Replacement .