Tools Required

1. Install the 1st speed gear synchronizer blocking ring.
2. Install the 1st speed gear synchronizer inner cone.
3. Install the 1st speed gear synchronizer outer cone.



4. Install the bearing sleeve pin.
5. Install the bearing sleeve.
6. Install the 1st speed gear needle bearing assembly.



7. Install the 1st speed gear.



8. Install the mainshaft rear bearing assembly.



9. Install the 5th speed driven gear using the J 25234 and a hydraulic press.



10. Install the reverse sliding gear.



11. Install the 1st/2nd speed synchronizer spring and the inserts into the reverse sliding gear.
12. Line up scribed marks on the synchronizer hub and on the sleeve.



13. Install the 1st/2nd speed gear synchronizer blocking ring.
14. Install the 1st/2nd speed gear synchronizer outer cone.
15. Install the 1st/2nd speed gear synchronizer inner cone.
16. Install the 1st speed gear thrust washer.



17. Install the synchronizer spiral retaining ring.



18. Install the 2nd speed gear needle bearing assembly and the spacer.



19. Install the thrust washer and the 2nd speed gear.



20. Install the 2nd speed gear retainer ring.



21. Install the 3rd speed gear needle bearing assembly and the spacer.



22. Install the 3rd speed gear (using the J 37372 and a hydraulic press.)
23. Install the 3rd speed gear blocker ring.
24. Install the 3rd/4th speed gear synchronizer.
25. Install the 4th speed gear blocking ring.