GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Camaro 🢒 General Information 🢒 Maintenance and Lubrication 🢒 Engine Oil and Oil Filter Replacement

Removal Procedure
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Position the oil drain pan under the engine oil drain plug.

    3. Object Number: 190564 Size: SH
  3. Remove the engine oil drain plug.
  4. Clean and inspect the engine oil drain plug, replace if necessary.
  5. Clean and inspect the engine oil drain plug sealing surface on the oil pan, replace the oil pan if necessary.

    6. Object Number: 440847 Size: SH
  6. Remove the oil filter.
  7. Clean and inspect the oil filter sealing area on the oil filter adapter, replace if necessary. Refer to Oil Filter Adapter Removal .

Installation Procedure

    Object Number: 440847 Size: SH
  1. Lightly oil the replacement oil filter gasket with clean engine oil.
  2. Install a new engine oil filter.

    3. Tighten
    Tighten the engine oil filter to 30 N·m (22 lb ft).


    Object Number: 190564 Size: SH
  3. Install the engine oil drain plug.

    4. Tighten
    Tighten the engine oil drain plug to 30 N·m (22 lb ft).

  4. Remove the oil drain pan.
  5. Lower the vehicle.
  6. Fill the engine with new engine oil.
  7. Start the engine.
  8. Inspect for oil leaks after engine start up.
  9. Turn off the engine and allow the oil a few minutes to drain back into the oil pan.
  10. Remove the oil level indicator from the oil indicator tube.
  11. Clean off the indicator end of the oil level indicator with a clean paper towel or cloth.
  12. Install the oil level indicator into the oil level indicator tube until the oil level indicator handle contacts the top of the oil level indicator tube.
  13. Again, remove the oil level indicator from the oil level indicator tube keeping the tip of the oil level indicator down.
  14. Check the level of the engine oil on the oil level indicator.
  15. If needed add or drain the engine oil to the correct level.