GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Camaro 🢒 Body and Accessories 🢒 Seats 🢒 Driver or Passenger Seat Back Cushion Finish Panel Replacement

Removal Procedure

    Object Number: 727774 Size: SH
  1. Remove the caps from the seat back outer finish panel.

    2. Remove the screws from the seat back outer finish panel.

    Remove the seat back outer finish panel from the front bucket seat back.


    Object Number: 727746 Size: SH
  2. Remove the screws from the seat back inner finish panel.

    3. Remove the seat back inner finish panel from the front bucket seat back.

Installation Procedure

    Object Number: 727746 Size: SH
  1. Install the seat back inner finish panel to the front bucket seat back.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screws to the seat back inner finish panel.

    3. Tighten
    Tighten the screws to 1.7 N·m (15 lb in).


    Object Number: 727774 Size: SH
  3. Install the seat back outer finish panel to the front bucket seat back.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the screws to the seat back outer finish panel.

    5. Tighten
    Tighten the screws to 1.7 N·m (15 lb in).

  5. Install the caps to the seat back outer finish panel.