Duplicating Ignition Keys
Tools Required
J 35628-A PASS/VATS
Interrogator
In order to duplicate an ignition key, determine the proper electrical
code of the key.
- Insert the customer's spare ignition key into the key code reader
on J 35628-A
.
- Press the ON-OFF rocker switch to the ON position.
- A number from 1 to 15 appears in the window. This number indicates
the electrical code of the key. If the interrogator displays E, replace the
ignition key.
- Cut a new key having the electrical code determined in step 3.
- Use the new key to start the vehicle. Ensure the following conditions:
• | The key is mechanically correct. |
• | The key is electrically correct. |