Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the system operation and perform the necessary inspections? | -- | ||
2 |
Does the key-in-ignition chime sound? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | |
3 |
Are the courtesy lamps ON? | -- | ||
4 |
Is there continuity? | -- | ||
5 | Test for and repair a poor connection at the BCM connector C3. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and repair a poor connection? | -- | ||
6 | Replace the BCM. Refer to Body Control Module Replacement in Body Control System. Did you complete the replacement? | -- | -- | |
7 |
Is there continuity? | -- | ||
8 | Repair the open in circuit 650 between the ignition key warning switch and S216. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
9 | Test for and repair a poor connection at connector C216 terminal E. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and repair a poor connection? | -- | ||
10 | Test for and repair an open in circuit 80 between the ignition key warning switch and the BCM. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and repair an open? | -- | ||
11 | Replace the ignition key warning switch. Refer to Ignition Switch Replacement - On Vehicle . Did you complete the replacement? | -- | -- | |
12 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
