Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
|
Important: In order to avoid misdiagnosis, check for proper engine oil pressure before performing this diagnosis. Refer to Oil Pressure Diagnosis and Testing (V8 VIN G) or Oil Pressure Diagnosis and Testing (V6 VIN K). | ||||
1 | Did you perform the Diagnostic System Check? | -- | ||
2 | Start the vehicle. Does the engine oil temperature gauge read at an acceptable level? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | |
3 |
Does the engine oil pressure gauge read high pressure? | -- | ||
4 | Replace the engine oil pressure sensor. Refer to Engine Oil Pressure Sensor or Switch Replacement . Did you complete the replacement? | -- | -- | |
5 | Test for and repair a short to ground in circuit 31. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and repair a short to ground? | -- | ||
6 | Replace the instrument cluster. Refer to Instrument Cluster Replacement . Did you complete the replacement? | -- | -- | |
7 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | |
