Did you perform the Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

Start the vehicle.

Does the CHECK GAGES indicator illuminate during the bulb test?

--

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

1. Connect a scan tool to the vehicle data link connector (DLC).
2. Enter the instrument cluster WOW mode.
3. Command the instrument cluster indicators on.

Does the CHECK GAGES indicator turn on?

--

Go to Powertrain On Board Diagnostic (OBD) System Check (3.8L) or Powertrain On Board Diagnostic (OBD) System Check (5.7L)

Go to Step 4

Replace the instrument cluster. Refer to Instrument Cluster Replacement .

Did you complete the replacement?

--

Go to Step 5

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 3