- Inspect the duct work for the following conditions:
• | The proper installation |
- Inspect the blower operation.
- Inspect the following components for the proper installation and
the proper operation:
- Inspect for the incorrect operation of the controls.
Advise the driver of the proper operation of the controls.
- Inspect the engine for low engine coolant level.
Perform the following steps, as necessary:
• | Inspect the engine for coolant leaks. |
• | Run the engine in order to clear any air locks. |
- Inspect for a faulty engine thermostat.
Replace the thermostat, if necessary.
- Inspect for a kinked heater hose.
Perform the following steps, as necessary:
• | Straighten the heater hose. |
• | Replace the heater hose. |
- Inspect for obstructed heater core tubes.
An obstruction usually causes a squishing noise in the heater core.
Perform the following steps, as necessary:
• | Remove any foreign material from the heater core. |
• | Replace the heater core. |
- Inspect for one of the following conditions:
• | Replace a faulty blower motor. |
• | A faulty blower circuit |
• | Repair or replace faulty wires or connections. |