Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Wiper/Washer System Check performed? | -- | Go to Step 2 | |
2 |
Is the test light on? | -- | Go to Step 4 | Go to Step 3 |
3 | Repair the open circuit condition or poor connection condition in circuit 143 to the wiper/washer switch assembly. Is the repair complete? | -- | -- | |
4 |
Is the test light on? | -- | Go to Step 7 | Go to Step 5 |
5 | Check for a poor connection at connector C211, terminal E3 and E4 or an open circuit condition in circuit 92 or 143 to the wiper/washer switch. Is a poor connection condition or an open circuit condition present? | -- | Go to Step 6 | Go to Step 14 |
6 | Repair the poor connection condition or the open circuit condition. Is the repair complete? | -- | -- | |
7 |
Is the test light on? | -- | Go to Step 9 | Go to Step 8 |
8 | Repair the open circuit condition or the poor connection condition in circuit 92 between connection C211 and the wiper motor assembly. Is the repair complete? | -- | -- | |
9 | Connect the test light from the wiper motor connector terminal C to terminal B. Is the test light on? | -- | Go to Step 11 | Go to Step 10 |
10 | Repair the open circuit condition or poor connection in ground circuit 850. Is the repair complete? | -- | -- | |
11 | Check for a poor connection condition to the wiper motor assembly. Is a poor connection condition present? | -- | Go to Step 13 | Go to Step 12 |
12 | Replace the wiper motor assembly. Refer to Windshield Wiper Motor Replacement . Is the replacement complete? | -- | -- | |
13 | Repair the poor connection condition. Is the repair complete? | -- | -- | |
14 | Replace the wiper/washer switch assembly. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle . Is the replacement complete? | -- | -- |
