For 1990-2009 cars only
End Gate Handle Binds (Replace Handle)
| Subject: | End Gate Handle Binds (Replace Handle) |
| Models: | 2002 Chevrolet Avalanche |
| Built Prior to June 1, 2001 |
Condition
Some customers may comment that the end gate handle binds when opening.
Correction
Important: Handle replacement requires that the upper molding (Spoiler) be removed. Engineering has determined that this molding be replaced if removed. When ordering the handle also order the molding listed below.
Replace the rear handle. Refer to the Handle Replacement - End Gate procedure in the Body Rear End sub-section of the Service Manual for end gate handle replacement (SI 2000 Document ID# 827396).
Parts Information
Part Number | Description |
|---|---|
15086873 | Handle Asm. Pubx. |
88936997 | Molding |
Part are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use:
Labor Operation | Description | Labor Time |
|---|---|---|
B5800 | Handle, Tailgate Outside - Replace | 1.2 hrs |
