Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did the Garage Door Opener symptom table bring you here? | -- | Go to Step 2 | Go to Symptoms |
2 |
Is Battery Voltage present? | B+ | Go to Step 8 | Go to Step 3 |
3 | Test for Battery Voltage with DMM from (BCM) Body Control Module connector C2 cavity B12 to ground. Is Battery Voltage present? | B+ | Go to Step 4 | Go to Step 5 |
4 | Repair OPEN in CKT 1732 (ORN) between S258 connector C2 of Overhead Console. Is the repair complete? | -- | Go to Step 11 | -- |
5 |
Is Battery Voltage present? | B+ | Go to Step 6 | Go to Step 7 |
6 | Repair OPEN in CKT 1732 (ORN) between BCM and the Overhead Console. Is the repair complete? | -- | Go to Step 11 | -- |
7 | Refer to the (BCM) Body Control Module Diag nostic System Check Diagnostic System Check - Body Control System in Body Control Systems. Is the repair complete? | -- | Go to Step 11 | -- |
8 | Test CKT 1350 (BLK) for continuity between Console C2 cavity D and G400 Is continuity present? | -- | Go to Step 9 | Go to Step 10 |
9 | Replace Overhead Console Refer to Garage Door Opener Module Replacement Is the repair complete? | -- | Go to Step 11 | -- |
10 | Repair OPEN in CKT 1350 (BLK) between Overhead Console and G400. Is the repair complete? | -- | Go to Step 11 | -- |
11 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
