Important: The following steps must be completed before using the symptom tables.
- Perform
Diagnostic System Check - Lighting Systems
before using the symptom tables in order to verify
that all of the following are true:
| • | The body control module (BCM) can communicate via the serial data
link. |
- Review the system operation in order to familiarize yourself with
the system functions. Refer to the following:
Visual/Physical Inspection
Several of the symptom procedures ask for a careful visual/physical
check. This step is extremely important-it could lead to correcting a problem
without further checks and can save valuable time. These checks
include the following:
| • | Inspect the easily accessible or visible system components and
harness connectors for obvious damage or conditions which could cause the
symptom. |
| • | If only one lamp is inoperative, inspect and repair a poor connection
or an open in the power feed or ground circuit before replacing the light
bulb. Refer to
Circuit Testing
and
Wiring Repairs
in Wiring
Systems. |
Symptom List
Refer to a symptom diagnostic procedure from the following list in order
to diagnose a symptom that does not set a DTC:
