Removal Procedure
- Remove the instrument panel (I/P) compartment from the I/P. Refer to
Instrument Panel Compartment Replacement
in Instrument
Panel, Gages and Console.
- Disconnect the electrical connector from the I/P compartment lamp switch.
- Depress the retainers on the switch.
- Remove the switch from the I/P compartment.
- If required, remove the bulb.
Installation Procedure
- If required, install the bulb.
- Connect the electrical connector to the I/P compartment lamp switch.
- Install the switch to the I/P compartment.
- Press in the switch until the retainers are fully seated.
- Install the I/P compartment. Refer to
Instrument Panel Compartment Replacement
in Instrument Panel, Gages and Console.