Removal Procedure
- Remove the trim plate from the instrument panel cluster. Refer
to
Instrument Panel Cluster Trim Plate Bezel Replacement
.
- Disconnect the electrical
connector from the trip odometer and reset switch.
- Release the retainers
on the trip odometer and reset switch by using a small flat-bladed tool.
- Remove the trip odometer
and reset switch from the trim plate.
Installation Procedure
- Align the trip odometer
and reset switch to the trim plate.
- Install the trip odometer
and reset switch by pressing into place until fully seated.
- Connect the electrical
connector to the trip odometer and reset switch.
- Install the trim plate to the instrument panel cluster. Refer
to
Instrument Panel Cluster Trim Plate Bezel Replacement
.