GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SRX 🢒 Engine 🢒 Engine Mechanical - 4.6L (LH2) 🢒 Engine Wiring Harness Assembly Installation

Left Side Harness Connections

    Object Number: 927839 Size: SH
  1. Connect the engine wiring harness to the left side fuel injectors.

    2. Object Number: 927781 Size: SH
  2. Connect the engine wiring harness to the left camshaft cover.

    3. Object Number: 927828 Size: SH
  3. Connect the engine wiring harness to the left coil assembly harness.

    4. Object Number: 927792 Size: SH
  4. Connect the engine wiring harness to the left camshaft position sensors.

    5. Object Number: 927862 Size: SH
  5. Connect the engine wiring harness to the EVAP purge solenoid.

    6. Object Number: 927869 Size: SH
  6. Connect the engine wiring harness to the throttle position sensor on the throttle body.

    7. Object Number: 1346039 Size: SH
  7. Connect the engine wiring harness to the air conditioner compressor.

    8. Object Number: 1346041 Size: SH
  8. Connect the engine wiring harness to the oil pressure sensor.

Right Side Harness Connections

    Object Number: 927838 Size: SH
  1. Connect the engine wiring harness to the right side fuel injectors.

    2. Object Number: 927778 Size: SH
  2. Connect the engine wiring harness to the right camshaft cover.

    3. Object Number: 927822 Size: SH
  3. Connect the engine wiring harness to the right coil assembly harness.

    4. Object Number: 927790 Size: SH
  4. Connect the engine wiring harness to the right camshaft position sensors.

    5. Object Number: 927871 Size: SH
  5. Connect the engine wiring harness ground to the intake manifold stud.

    6. Caution: Refer to Fastener Caution in the Preface section.

  6. Install the engine wiring harness ground nut and tighten to 10 N·m (89 lb in).

    7. Object Number: 927819 Size: SH
  7. Connect the engine wiring harness to the ECT sensor at the rear of the right cylinder head.

    8. Object Number: 1346050 Size: SH
  8. Connect the engine wiring harness to the generator.

    9. Object Number: 1346047 Size: SH
  9. Connect the starter motor wiring harness to the generator.
  10. Install the starter motor wiring harness generator nut and tighten to 10 N·m (89 lb in).

    11. Object Number: 927850 Size: SH
  11. Connect the engine wiring harness to the MAP sensor.

    12. Object Number: 927798 Size: SH
  12. Connect the engine wiring harness to the knock and crankshaft position sensor wiring harness.

    13. Object Number: 1346053 Size: SH
  13. Install the engine wiring harness bracket to the side of the right cylinder head.
  14. Install the engine wiring harness bracket bolts and tighten to 45 N·m (33 lb ft).