Removal Procedure
- Remove the rear console trim panel. Refer to
Center Console End Panel Replacement
in Instrument Panel, Gages, and Console.
- Remove the arm rest filler. Refer to
Front Floor Console Armrest Replacement
in Instrument
Panel, Gages, and Console .
- Remove the 4 screws securing the DVD player to the console base bracket. Refer
to
Floor Console Bracket Replacement
in
Instrument Panel, Gages, and Console.
- Slide the DVD player out of the bracket.
- Disconnect the electrical connectors.
- Remove the screws securing the screen to the DVD player bracket.
- Remove the screen.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws securing the screen to the DVD player bracket.
Tighten
Tighten the screws to 9 N·m (80 lb in).
- Connect the electrical connectors.
- Slide the DVD player into the bracket.
- Install the 4 screws securing the DVD player to the console base bracket.
Refer to
Floor Console Bracket Replacement
in
Instrument Panel, Gages, and Console.
Tighten
Tighten the screws to 9 N·m (80 lb in).
- Install the arm rest filler. Refer to
Front Floor Console Armrest Replacement
in Instrument
Panel, Gages, and Console.
- Install the rear console trim panel. Refer to
Center Console End Panel Replacement
in Instrument Panel, Gages, and Console.