GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2006 🢒 SRX 🢒 Body 🢒 Instrument Panel, Gages, and Console 🢒 Driver Knee Bolster Bracket Replacement

Removal Procedure
  1. Remove the knee bolster trim. Refer to Knee Bolster Replacement .

    2. Object Number: 714033 Size: SH
  2. Remove the screws (2) securing the knee bolster bracket to the I/P.
  3. Remove the knee bolster bracket.

Installation Procedure

    Object Number: 714033 Size: SH
  1. Align the tabs (1) to the I/P carrier in order to install the knee bolster bracket.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screws (2) securing the knee bolster bracket to the I/P.

    3. Tighten
    Tighten the fasteners to 9 N·m (80 lb in).

  3. Install the knee bolster trim. Refer to Knee Bolster Replacement .