For 1990-2009 cars only
Removal Procedure
- Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
- Remove the screws (2) that retain the compartment bin assembly to the door trim.
- Release the tab (1) that retains the compartment bin to the door trim.
- Remove the compartment bin from the door trim.
- Squeeze the tabs (1) on the compartment bin latch together in order to remove the latch.
- Remove the latch.
- Remove the hinge (1) from the compartment bin.
Installation Procedure
- Install the hinge (1) to the door compartment bin.
- Ensure that the spring is located in the proper position.
- Install the latch by pushing the latch in until the tabs (1) lock into position.
- Install the compartment bin to the door trim panel. Ensure the lower tab (3) of the bin is properly located.
- Engage the locking tab (1) at the top of the compartment bin to the door trim panel.
- Install the door trim panel screws (2).
- Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the screw to 1 N·m (9 lb in).
