Install
the handle rod to the outside door handle bracket.
Install the outside door handle bracket by inserting into opening and
sliding forward.
Install
the gaskets.
Raise
the outside door handle counterbalance weight and install the outside door handle
by tilting the handle rearward and inserting into bracket then sliding forward until
an audible click is heard.
Open
the door handle slightly then install the cap.
Install the screw securing the outside door handle cap.
Install the outside door handle cap screw access plug to the door.
Connect the door handle rod to the latch.
8.1.
Insert the rod (1) into the clip (2) on the door latch
assembly.
8.2.
Close the clip.
Important: Inspect for the proper operation of the door
handle before installing the water deflector and the door trim panel.