GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2006 🢒 SRX 🢒 Body 🢒 Doors 🢒 Rear Side Door Stationary Window and Front Channel Replacement

Removal Procedure

    Object Number: 1199201 Size: SH
  1. Lower the window to the full down position.
  2. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  3. Remove the door module. Refer to Door Control Module Replacement .
  4. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  5. Remove the window inner belt sealing strip. Refer to Rear Door Window Belt Inner Sealing Strip Replacement .
  6. Remove the window. Refer to Rear Side Door Window Replacement .
  7. Remove the window outer belt sealing strip. Refer to Rear Door Window Belt Outer Sealing Strip Replacement .
  8. Pull the window weatherstrip out of the door header.
  9. Remove the stationary window post bolt.
  10. Remove the window weatherstrip from the door header all the way back to the division post.
  11. Grasp the division post and pull forward in order to remove the rear door stationary window from the door.

Installation Procedure

    Object Number: 1199201 Size: SH
  1. Lubricate the rearward edge of the stationary window with a soap and water solution to ease the installation into the door frame.
  2. Align the locator latch to the rear of the door frame.
  3. Seat the stationary window assembly rearward into the door frame.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the stationary window post bolt.

    5. Tighten
    Tighten the bolt to 9 N·m (80 lb in).

  5. Install the window weatherstrip into the door frame.
    6. 5.1. Insert the upper forward corner into the door frame.
    5.2. Install the upper portion of the weatherstrip into the door frame.
    5.3. Working downward from the center-pillar install the remainder of the window weatherstrip.
  6. Install the window. Refer to Rear Side Door Window Replacement .
  7. Install the window outer belt sealing strip. Refer to Front Side Door Window Belt Outer Sealing Strip Replacement .
  8. Install the window inner belt sealing strip. Refer to Rear Door Window Belt Inner Sealing Strip Replacement .
  9. Install the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  10. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement .