GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2006 🢒 SRX 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Digital Radio Antenna Cable Replacement

Removal Procedure
  1. Remove the right rear body side trim. Refer to Body Side Rear Trim Panel Replacement in Interior Trim.
  2. Remove the right rear body side garnish molding. Refer to Body Side Rear Upper Garnish Molding Replacement in Interior Trim.
  3. Remove the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.

    4. Object Number: 1211148 Size: SH
  4. Disconnect the digital antenna connector from the receiver.

    5. Object Number: 1211078 Size: SH
  5. Disconnect the digital antenna cable connector from the antenna.
  6. Remove the cable.

Installation Procedure

    Object Number: 1211078 Size: SH
  1. Install the cable to the vehicle.
  2. Connect the digital antenna cable connector to the antenna.

    3. Object Number: 1211148 Size: SH
  3. Connect the digital antenna connector to the receiver.
  4. Install the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.
  5. Install the right rear body side garnish molding. Refer to Body Side Rear Upper Garnish Molding Replacement in Interior Trim.
  6. Install the right rear body side trim. Refer to Body Side Rear Trim Panel Replacement in Interior Trim.