Important: Use the symptom tables only if the following conditions are met:
• | There are no DTCs set. |
• | The control modules can communicate via the serial data link. |
Visual/Physical Inspection
Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.
Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to
Testing for Intermittent Conditions and Poor Connections.
Symptom List
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:
• | Noise and Vibration Diagnosis |
• | Range Performance Diagnosis |
• | Shift Quality Feel Diagnosis |
• | Torque Converter Diagnosis |
• | Symptom Not Found or No Symptom Detected |