GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Cadillac
🢒
2007
🢒
Escalade EXT
🢒
Steering
🢒
Power Steering
🢒 Power Steering Pump Pulley Replacement
Power Steering Pump Pulley Replacement 4.3L, 4.8L, 5.3L, 6.0L,6.2L
Tools Required
•
J 25033-C
Pulley Installer
•
J 25034-C
Pulley Remover
Removal Procedure
Remove the engine coolant fan upper shroud, if equipped. Refer to
Engine Coolant Fan Upper Shroud Replacement
.
Remove the accessory drive belt. Refer to
Drive Belt Replacement - Accessory
.
Use remover
J 25034-C
to remove the power steering pump pulley.
Installation Procedure
Place the power steering pump pulley on the end of the power steering pump shaft.
Install the power steering pump pulley using installer
J 25033-C
.
Ensure that the power steering pump pulley (1) is flush against the power steering pump shaft (2) with an allowable variance of 0.25 mm (0.010 in).
Install the accessory drive belt. Refer to
Drive Belt Replacement - Accessory
.
Install the engine coolant fan upper shroud, if equipped. Refer to
Engine Coolant Fan Upper Shroud Replacement
.