Side Object Sensor Replacement. Cadillac DTS 2008

For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2008 🢒 DTS 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Side Object Sensor Replacement

Callout	Component Name
Preliminary Procedure Remove the bumper fascia. Refer to Rear Bumper Fascia Replacement .
1	Side Object Sensor Module Bolt Notice: Refer to Fastener Notice in the Preface section. Tip Disconnect the electrical connectors. Tighten 9 N·m 80 lb in
2	Side Object Sensor Module

Callout

Component Name

Remove the bumper fascia. Refer to Rear Bumper Fascia Replacement .

Side Object Sensor Module Bolt

Notice: Refer to Fastener Notice in the Preface section.

Tip
Disconnect the electrical connectors.

Tighten
9 N·m 80 lb in

Side Object Sensor Module