| Table 1: | Radio Scan Tool Data Parameters |
| Table 2: | Radio Scan Tool Output Controls |
Parameter | System State | Expected Value | Description |
|---|---|---|---|
Operating Conditions: Ignition ON | |||
Antenna Module | -- | Enabled | This scan tool displays Enabled or Disabled. This is the state of the antenna module. |
Auxiliary Audio Input | -- | Present | The scan tool displays Present or Not Present. This is the state of the auxiliary audio input. |
DRR | -- | Present | The scan tool displays Present or Not Present. This is the state of the DRR. |
Ign. Cycles Since last DTC | -- | Varies | The scan tool displays the number of ignition cycles since the last DTC. |
Phone Signal | -- | Present | The scan tool displays Present or Not Present. This is the state of the phone signal. |
Power Mode | -- | Run | The scan tool displays Off, Accessory, Run or Crank Request. This is the state of the ignition switch. |
Power Mode Config. | -- | Normal Mode | The scan tool displays Bench Mode or Normal Mode. This is the configuration of the power mode. |
Signal Strength | -- | Varies | This displays dBuV. This is the signal strength of the radio. |
Theft Armed | -- | Learned VIN | The scan tool displays Learned VIN or No VIN. This is the state of the VIN programming in the radio. |
Theft Lock Status | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the theft lock system. |
Video Display | -- | Varies | The scan tool displays Present or Not Present. This is the state of the video display. |
Output Control | Description |
|---|---|
Left Front Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
Left Rear Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
Right Front Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
Right Rear Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
