| Table 1: | Memory Seat Module Scan Tool Data Parameters |
| Table 2: | Memory Seat Module Scan Tool Output Controls |
Parameter | System State | Expected Value | Description |
|---|---|---|---|
Operating Conditions: Ignition ON | |||
Column Downward Softstop Pos. | -- | Varies | Displays the tilt downward softstop position in volts or counts. |
Column Forward Softstop Pos. | -- | Varies | Displays the telescope forward softstop position in volts or counts. |
Column Rearward Softstop Pos. | -- | Varies | Displays the telescope rearward softstop position in volts or counts. |
Column Softstop Learn Status | -- | Unlearned | Displays Learned if the softstops are learned, and Unlearned if the softstops have not been learned. |
Column Upward Softstop Pos. | -- | Varies | Displays the tilt upward softstop position in volts or counts. |
Driver Seat Front Vertical Sensor | -- | Varies | This displays Volts. This is the voltage supplied to the driver seat front vertical sensor. |
Driver Seat Horizontal Sensor | -- | Varies | This displays Volts. This is the voltage supplied to the driver seat horizontal sensor. |
Driver Seat HVC Level | -- | High | The scan tool displays High, Medium or Low. This is the current level of the driver heated seat or the heated cooled seat. |
Driver Seat HVC Mode | -- | Off | The scan tool displays Off, Back & Cushion, Back Only or Cool. This is the current mode of the driver heated seat or the heated cooled seat. |
Driver Seat Rear Vertical Sensor | -- | Varies | This displays Volts. This is the voltage supplied to the driver seat rear vertical sensor. |
Driver Seat Recline Sensor | -- | Varies | This displays Volts. This is the voltage supplied to the driver seat recline sensor. |
Front Vertical Downward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical downward switch. |
Front Vertical Motor Downward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical motor downward. |
Front Vertical Motor Upward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical motor upward. |
Front Vertical Upward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical upward switch. |
Horizontal Forward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal forward switch. |
Horizontal Motor Forward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal motor forward. |
Horizontal Motor Rearward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal motor rearward. |
Horizontal Rearward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal rearward switch. |
Lumbar Downward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar downward switch. |
Lumbar Forward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar forward switch. |
Lumbar Horizontal Sensor | -- | Varies | This displays Volts. This is the voltage supplied to the lumbar horizontal sensor. |
Lumbar Inflation Value | -- | Varies | This displays Volts. This is the voltage stored in memory for the lumbar inflation. |
Lumbar Vertical Sensor | -- | Varies | This displays Volts. This is the voltage supplied to the lumbar vertical sensor. |
Lumbar Motor Downward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar motor downward. |
Lumbar Motor Forward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar motor forward. |
Lumbar Motor Rearward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar motor rearward. |
Lumbar Motor Upward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar motor upward. |
Lumbar Rearward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar rearward switch. |
Lumbar Upward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar upward switch. |
Lumbar Vertical Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the lumbar vertical position. |
Lumbar Vertical Sensor | -- | Varies | This displays Volts. This is the voltage supplied to the lumbar vertical sensor. |
Massage Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the massage switch. |
Memory 1 Telescope Position | -- | -- | Displays the telescope memory position for driver 1. |
Memory 1 Tilt Position | -- | -- | Displays the tilt memory position for driver 1. |
Lumbar Vertical Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the lumbar vertical position. |
Passenger Seat HVC Level | -- | High | The scan tool displays High, Medium or Low. This is the current level of the passenger heated seat or the heated cooled seat. |
Passenger Seat HVC Mode | -- | Off | The scan tool displays Off, Back & Cushion, Back Only or Cool. This is the current mode of the passenger heated seat or the heated cooled seat. |
Rear Vertical Downward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical downward switch. |
Rear Vertical Motor Downward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical motor downward. |
Rear Vertical Motor Upward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical motor upward. |
Rear Vertical Upward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical upward switch. |
Recline Forward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the recline forward switch. |
Recline Motor Forward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the recline motor forward. |
Recline Motor Rearward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the recline motor rearward. |
Recline Rearward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the recline rearward switch. |
Seat Front Vertical Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the seat front vertical position. |
Seat Horizontal Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the seat horizontal position. |
Seat Rear Vertical Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the seat rear vertical position. |
Seat Recline Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the seat recline position. |
Telescope Forward Command | -- | Inactive | Displays Active when the DPM energizes the telescope actuator to move forward. |
Telescope Forward Switch | -- | Inactive | Displays Active when the telescope forward switch is closed. |
Telescope Rearward Command | -- | Inactive | Displays Active when the DPM energizes the telescope actuator to move rearward. |
Telescope Rearward Switch | -- | Inactive | Displays Active when the telescope rearward switch is closed. |
Telescope Sensor | -- | Varies | Displays the forward/rearward position of the steering column in volts or counts. |
Tilt Down Command | -- | Inactive | Displays Active when the DPM energizes the tilt actuator to move down. |
Tilt Down Switch | -- | Inactive | Displays Active when the tilt down switch is closed. |
Tilt Sensor | -- | Varies | Displays the upward/downward position of the steering column in volts or counts. |
Tilt Up Command | -- | Inactive | Displays Active when the DPM energizes the tilt actuator to move up. |
Tilt Up Switch | -- | Inactive | Displays Active when the tilt up switch is closed. |
Output Control | Description |
|---|---|
Clear Column Softstops | This output control is used to clear the steering column softstops stored in memory. |
Front Up/Down | This output control is used to command the driver seat motor Up and Down. |
Learn Column Softstops | This output control is used to program the steering column softstops. |
Lumbar Forward/Rearward | This output control is used to command the driver seat lumbar forward and rearward. |
Lumbar Up/Down | This output control is used to command the driver seat lumbar Up and Down. |
Rear Up/Down | This output control is used to command the driver seat rear Up and Down. |
Recline Forward/Rearward | This output control is used to command the driver seat reclining forward and rearward. |
Seat Forward/Rearward | This output control is used to command the driver seat forward and backward. |
Telescope In/Out | This output control is used to command the telescope in and out. |
Tilt Up/Down | This output control is used to command the tilt Up and Down. |
