Parameter | System State | Expected Value | Description |
|---|---|---|---|
Operating Conditions: The ignition is ON / The engine is OFF / Vehicle is in Park or Neutral / Cruise On / Off Switch is Turned OFF | |||
Clean Radar Indicator Message | -- | Off | The scan tool displays On / Off. This is the state of the clean radar indicator message as commanded by the distance sensing cruise control (DSCC) module. |
Cruise On / Off Switch | -- | Active | The scan tool displays On / Off. This is the state of the cruise control On/Off switch as detected by the ECM. |
Driver Throttle Override Status | -- | Inactive | The scan tool displays Active / Inactive. The ECM monitors the throttle and reports a throttle override condition initiated by the driver. |
Service Radar Indicator Message | -- | Off | The scan tool displays On / Off. This is the state of the service radar indicator as commanded by the DSCC module. |
Target Found this Ignition Cycle | -- | No | The scan tool displays Yes / No. The radar scans the road environment to detect the presence of a vehicle in its path. Yes is displayed if a target is acquired. |
Vehicle Ahead Indicator Message | -- | Off | The scan tool displays On / Off. This is the state of the vehicle ahead indicator as commanded by the DSCC module. |
