For 1990-2009 cars only
Transmission/Transaxle
All Component Locator
- Automatic Transmission Electronic Component Views
- Ball Check Valve Locations
- Bushing, Bearing, and Washer Locations
- Component Location
- Disassembled Views
- Fluid Passages
- Seal Locations
All Description and Operation
- Drive Range - Fourth Gear
- Drive Range, Fifth Gear
- Drive Range, Fifth Gear Default
- Drive Range, First Gear
- Drive Range, First Gear Engine Braking
- Drive Range, Second Gear
- Drive Range, Sixth Gear
- Drive Range, Third Gear
- Drive Range, Third Gear Default
- Neutral - Engine Running
- Park - Engine Running
- Reverse
All Special Tools and Equipment
Cleaning, Inspection, and Adjustment
- 3-5 Reverse Clutch Backing Plate Retaining Ring Measurement
- 4-5-6 Clutch Backing Plate Retaining Ring Measurement
- Case Inspection
- Control Valve Lower Body Assembly Cleaning and Inspection
- Control Valve Upper Body Assembly Cleaning and Inspection
- Fluid Pump Selective Measurement
- Torque Converter Housing Cleaning and Inspection
Disassembly, Overhaul, Repair, and Assembly
- 1-2-3-4 and 3-5 Reverse Clutch Assembly and 4-5-6 Clutch Assembly Removal
- 1-2-3-4 and 3-5 Reverse Clutch Overhaul
- 2-6 Clutch Overhaul
- 4-5-6 Clutch Dampener Overhaul
- 4-5-6 Clutch Overhaul
- Automatic Transmission Electrical Connector Passage Sleeve Installation
- Case Extension Assembly Removal
- Center Support, Output Carrier and Output Shaft Installation
- Center Support, Output Carrier and Output Shaft Removal
- Control Valve Body Assembly Assemble
- Control Valve Body Assembly Disassemble
- Manual Shift Shaft and Parking System Components Overhaul
- Output Carrier Assembly Overhaul
- Output Carrier to Output Shaft Assemble
- Output Shaft Assemble
- Output Shaft Disassemble
- Output Shaft Seal Replacement
- Torque Converter Fluid Seal Replacement
- Torque Converter Housing with Fluid Pump Assemble
- Torque Converter Housing with Fluid Pump Disassemble
- Torque Converter Installation and Holding Fixture Removal
- Torque Converter Removal and Holding Fixture Installation
- Transmission Fluid Cooler Pipe Seal Replacement
- Transmission Fluid Pan, Filter and Electrical Connector Passage Sleeve Removal
General Information
Mechanical Specifications
- Clutch Backing Plate Retaining Ring Specifications
- Fastener Tightening Specifications
- Fluid Capacity Specifications
- Fluid Pump Selective Specifications
Other Specifications
