Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure.
When the theft deterrent module (TDM) is in the learn coded key or learn more keys mode, the TDM checks the current key to ensure it has been configured as a proper vehicle key.
• | Ignition is in the Accessory or Run position. |
• | The TDM is in the learn coded key or learn more keys mode. |
The TDM has determined the current key is not configured as a proper vehicle key.
The security indicator will be illuminated.
• | A current DTC will be cleared when the TDM detects a properly configured vehicle key. |
• | A history DTC will be cleared after 100 malfunction free ignition cycles or when a scan tool is used to clear DTCs. |
Theft Deterrent System Schematics
Theft Deterrent System Connector End Views
Vehicle Theft Deterrent (VTD) Description and Operation
Important: When using this diagnostic, more than one vehicle key is required to ensure proper diagnosis. If more than one key is not available at the time of service, contact the customer and ask if any other keys can be provided for service. If unavailable, a new second key can be created.
While viewing DTCs with a scan tool, attempt to start the vehicle using all of the available keys. The vehicle should start with all available keys.
⇒ | If any key results in inoperative starting and DTC B3976 is set as current, replace the suspect key. |
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
• | Control Module References for Theft Deterrent Module replacement, setup, and programming. |