Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Remove the floor console. Refer to Console Replacement .
2. Disconnect the auxiliary blower assembly electrical connectors.

1

Auxiliary Temperature Actuator Screw (Qty: 3)

Tighten
1.0 N·m (9 lb in)

2

Auxiliary Temperature Actuator

3

Auxiliary Blower Motor Assembly Screw (Qty: 3)

Tighten
1.0 N·m (9 lb in)

4

Auxiliary Blower Motor Assembly

5

Auxiliary Blower Motor Screw (Qty: 3)

Tighten
1.0 N·m (9 lb in)

6

Auxiliary Blower Motor

7

Auxiliary Temperature Actuator Mode Cam Screw

Tighten
1.0 N·m (9 lb in)

8

Auxiliary Temperature Actuator Mode Cam

9

Auxiliary Temperature Actuator Mode Cam Lever (Qty: 2)

10

Auxiliary Blower Housing Right

11

Auxiliary Blower Housing Temperature Door

12

Auxiliary Blower Housing Left