GM Service Manual Online
For 1990-2009 cars only

Object Number: 1962800  Size: MF

Callout

Component Name

Preliminary Procedure

  1. Remove windshield garnish molding. Refer to Windshield Side Garnish Molding Replacement
  2. Lower the front of headliner to access the sunshade electrical connector, if necessary. Refer to Headlining Trim Panel Replacement

1

Sunshade Screw (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tip
The closeout snaps into place.

Tighten
3 N·m (25 lb in)

2

Sunshade Assembly

Procedure

  1. Squeeze the tabs at the base of the sunshade assembly to remove from the headliner.
  2. Disconnect the electrical connector.